Painted Engine Cover
 How to paint your plastic engine cover.
Est. Time: 1-2 hours w/drying time between coats

 

Picture to come
  1. Take the 3 screws out
Click to Enlarge - More Detail
  1. Remove Cover
  2. Clean Cover
Click to Enlarge - More Detail
  1. Get some masking tape and a x-acto knife
  2. Mask off the letters
  3. Use high temp spray paint - about 2-3 coats
  4. Use high temp clear coat - about 1-2 coats
Click to Enlarge - More Detail
  1. Let dry
  2. Set back on and screw back in
Click to Enlarge - More Detail

This is what it looks like after all is said and done

Warning:  I am not responsible for any damage that may occur if you follow my directions.