Spark Plugs
How to change your spark plugs

Est. Time:
20-40 minutes

 

Click to Enlarge - More Detail
  1. Remove the 3 screws from the engine cover
  2. Remove the engine cover
Click to Enlarge - More Detail
  1. Unscrew the 3 screws from the Grey box
  2. pull off the spark plug wires
Click to Enlarge - More Detail
  1. Use your torx wrench and take each one out one by one
  2. Set the torx wrench to 25ft-lbs and tighten the news ones back in
  3. Replace the spark plug wires the same way you took them off
Click to Enlarge - More Detail
  1. If you have a strut tower brace you need to take it off, at least on one side
  2. Remove the screws from the Distributor Cap
    1. 99-00 has 4 screws
    2. 01 has 3 screws
Click to Enlarge - More Detail
  1. Move the Cap out of your way
  2. Remove the spark plug wires
  3. Remove the spark plugs with the torx wrench
  4. Screw the new plugs in
  5. Replace the spark plug wires in the same order you removed them from
  6. Replace the Distributor Cap and screw the screws back in
   
   
   

Warning:  I am not responsible for any damage that may occur if you follow my directions.